J.W.HARRIS CO.INC. -- STAY BRITE SOLDERS  -- 3439-00-422-6327
<pre>=====================  Product Identification  =====================

Product ID:STAY BRITE SOLDERS
MSDS Date:04/01/1990
FSC:3439
NIIN:00-422-6327
=== Responsible Party ===
Company Name:J.W.HARRIS CO.INC.
Address:10930 DEERFIELD ROAD
City:CINCINNATI
State:OH
ZIP:45242
Country:US
Info Phone Num:513-891-2000
Emergency Phone Num:513-891-2000/800-424-9300(CHEMTREC)
Preparer's Name:KURT CARTHERS
CAGE:27911
=== Contractor Identification ===
Company Name:J. W. HARRIS CO., INC.
Address:10930 DEERFIELD ROAD
Box:City:CINCINNATI
State:OH
ZIP:45242-4110
Country:US
Phone:513-891-2000
CAGE:27911

=============  Composition/Information on Ingredients  =============

Ingred Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 96%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3

Ingred Name:SILVER  (SARA III)
CAS:7440-22-4
RTECS #:VW3500000
Fraction by Wt: 4%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.01 MG/M3
ACGIH TLV:0.1 MG/M3; 9394
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:YES    IARC:YES	  OSHA:NO
Health Hazards Acute and Chronic:ACUTAL EXPO SHOULD BE DETERMINED BY
    MONITORING FUME IN OPERATOR'S BREATHING ZONE.FUMES INHAL.POSSIBLE
    LEAD DUST INGEST FRM SMOKING/EATING AFT HNDLG LEAD BEARING
    SOLDERS.CU/ZN FUME:METAL FUME FEVER.CHR ONIC EXPO TO WELD
    FUMES/GAS/DUST:CONTRIBUTE TO PULM IRRIT/PNEUMOCONIOSIS.BRAZING
    ALLOYS FREQUENTLY USED W/FLUORIDE(SUPP)
Explanation of Carcinogenicity:PER MSDS:WHEN BRAZING/PRODUCT CONTAINS
    NICKEL.
Effects of Overexposure:SHORT TERM:METALLIC TASTE IN MOUTH,DRYNESS OR
    IRRIT OF THROAT FOLLOWED BY COUGHING,SHORTNESS OF
    BREATH,NAU,FEVER,BODY ACHE,CHILLS.
Medical Cond Aggravated by Exposure:INDIVIDUALS W/IMPAIRED PULMONARY
    FUNCTIONS OR ILLNESS MAY HAVE SYMPTOMIC EXACERBATED BY FUME
    IRRITANTS.

=======================  First Aid Measures  =======================

First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED,
    PERFORM ARTIFICIAL RESPIRATION. SUMMON MED AID IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER. HOWEVER USE
    APPROPRIATE FIRE EXTINGUISHING MEDIA FOR SURROUNDING FIRE/MATLS.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. HOWEVER USE
    APPROPRIATE PROTECTIVE PERSONNEL EQPMT AS CONDITIONS WARRANTS.
Unusual Fire/Explosion Hazard:OPEN FLAMES & SPARKS CAN IGNITE
    COMBUSTIBLES. SEE ANSI/AWS 749.1-1983 SEC 8.

======================	Handling and Storage  ======================

Handling and Storage Precautions:READ/UNDERSTAND MFG
    INSTRUCTIONS/PRECAUTIONARY LABEL.SEE AMER NAT STD Z49.1 & OSHA
    PUBLICATIN 2206 FOR ADDN INFO ON PPE/EQPMT.
Other Precautions:ONE RECOMMENDED WAY TO DETERMINE COMPOSITION/QUANT OF
    FUMES/GASES WORKERS EXPO TO:TAKE AIR SPL IN WORKERS BREATH ZONE.SEE
    ANSI/AWS F1.1 FRM AMER WELD SOC,POB351040,MIAMI,FLA33135.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE RESPIRABLE FUME RESP OR AIR SUPPLIED RESP
    WHEN BRAZING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
    VENTILATION DOES NOT KEEP EXPOUSRE BELOW TLV.
Ventilation:USE ENOUGH VENTI/LOC EXHA @FLAME TO KEEP FUME/GAS <TLV IN
    WORKER BREATH ZONE/GEN AREA.TRAIN WORKER KEEP HEAD OUT OF FUME
Protective Gloves:WELDERS GLOVES.
Eye Protection:SAF GLASSES,GOGG,FACESHIED W/FIL LENS.
Other Protective Equipment:PROVIDE PROT SCREENS/FLASH GOGG TO SHIELD
    OTHERS(ANSI/ASC Z49.1SEC4.2).HEAD/BODY PROT FRM HEAT
    RADIATION/SPAK/FLAME(SUP)
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
HAZ DECOMP:VENTILATION PRESENT,WORKERS HEAD POSITION,PRESENCE OF
    CONTAMINANTS IN ATM.HEALTH HAZ:TYPE FLUS.IF APPLICABLE FLUX FUME
    SHOULD BE CONSIDERED IN EVALUATION OF HAZARDS.PROT EQPT:MIN WELDER
    GLO VE/PROT FACESHILED/ARC PROT/APRONS/HATS/SHOULDER PROT/DARK
    SUBSTANTIAL CLOTHING.

==================  Physical/Chemical Properties  ==================

HCC:N1
Appearance and Odor:WIRE,GRAY TO SILVER IN COLOR.SOLDER MAY BE SOLID OR
    CONTAIN INNER CORE OF FLUX.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:BRAZING FUME/GAS NOT SIMPLY
    CLASSIFIED.DEPENDS ON METAL USED,PROCESS,PROCEDURES,FILLER
    METALS,METAL COATINGS,#OF (SUPPL)

====================  Disposal Considerations  ====================

Waste Disposal Methods:SARA SEC 313 FOTIFICATION:CONTAINS TOXIC CHEM
    SUBJ TO REPORTING PER SEC 313 EPCRA/40CFR372:AL,CR,CO,CU,MN,NI.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.